WE ARE COMMITTED TO THE DEVELOPMENT OF QUALITY
AFTERMARKET AUTOMOTIVE PRODUCTS.
Bring you quality products since 1990
1024 X 768 RESOLUTION IS REQUIRED TO PROPERLY VIEW THIS WEB PAGE
Our products are proudly made from steel purchased in the USA!
March 19 2011
© Copyright 2011 by Mercado Industries
All items shown are patent pending.
OFFICIAL WEB SITE FOR
C-4 DASH KEY SCRATCH GUARD
Thank-you for the purchase of our new C-4 Dash key scratch protector product. When installed correctly this product will prevent scratch marks from your keys on your dashboard.
Please follow the installation and care instructions exactly to insure you get the maximum usage and benefits from this product
TOOLS AND ADDITIONAL ITEMS REQUIRED
1) Hobby knife or X-acto knife
2) Rubbing alcohol
3) Philips screwdriver
Before you begin, insure that you have the proper product: Clear, or Gloss Black
STEP # 1 : Surface Preparation
In order for the product to adhere correctly to the dashboard surface, it must be free of all wax, grease, oil or cleaner.
1) Use rubbing alcohol ONLY, to clean the surface.
STEP # 2 : Product Application
1) Remove the screw using a Philips screwdriver. Apply 2 pieces of masking tape, one on the top of the product and the other on the bottom. Then pull the 2 pieces of tape apart, which will separate the product from its backing. Handle the product without the backing by the edges only!
Carefully position the product and apply. Using a cloth gently rub the film to insure adhesion.
1) Using the hobby knife, make a small slit in the product directly above the screw hole. (Note: before installation, measure and mark the screw hole position) Caution, once product is applied, it cannot be removed or it will lose it adhesive properties.
4) Re-install the screw.
Copyright by MERCADO INDUSTRIES © 2009