WE ARE COMMITTED TO THE DEVELOPMENT OF QUALITY
AFTERMARKET AUTOMOTIVE PRODUCTS.
Bring you quality products since 1990
1024 X 768 RESOLUTION IS REQUIRED TO PROPERLY VIEW THIS WEB PAGE
Our products are proudly made from steel purchased in the USA!
March 19 2011
© Copyright 2011 by Mercado Industries
All items shown are patent pending.
OFFICIAL WEB SITE FOR
C6 DOOR GRAB SCRATCH GUARD
Thank-you for the purchase of our new C6 Door Grab Scratch Guard protector product. When installed correctly this product will prevent scratch marks in the door grab area of you C6
Please follow the installation instructions exactly to insure you get the maximum usage and benefits from this product
TOOLS AND ADDITIONAL ITEMS REQUIRED
2) Surface cleaner degreaser
STEP # 1 : Surface Preparation
In order for the product to adhere correctly to the dashboard surface, it must be free of all wax, grease, oil or cleaner.
1) Use an automotive paint friendly cleaner / degreaser, to clean the surface.
STEP # 2 : Product Application
1) Apply 2 pieces of masking tape, one on the top of the product and the other on the bottom. Then pull the 2 pieces of tape apart, which will separate the product from its backing. Handle the product without the backing by the edges only!
Carefully position the product and apply. Using a cloth gently rub the film to insure adhesion.
2) Caution, once product is applied, it cannot be removed or it will lose it adhesive properties.
Once installed, your C6 Door Grab Scratch Guard will prevent scratches to the door grab area.
Copyright by MERCADO INDUSTRIES © 2009