WE ARE COMMITTED TO THE DEVELOPMENT OF QUALITY
AFTERMARKET AUTOMOTIVE PRODUCTS.
Bring you quality products since 1990
1024 X 768 RESOLUTION IS REQUIRED TO PROPERLY VIEW THIS WEB PAGE
Our products are proudly made from steel purchased in the USA!
March 19 2011
© Copyright 2011 by Mercado Industries
All items shown are patent pending.
OFFICIAL WEB SITE FOR
Z06 NOSE EURO GRILLE
Thank-you for the purchase of our new Z06 NOSE EURO GRILLE .
TOOLS AND ADDITIONAL ITEMS REQUIRED
1) Small flat screwdriver
2) Automotive Goop or equivalent Epoxy
INSTALLATION TIME – 20 minutes
STEP # 1: Preparation
Wrap the flat end of the screwdriver with duct tape.
Insert the flat end of the screwdriver at the middle lower end, between the plastic grille and the hood.
The plastic shell is held in place with a double sided tape about 1.5 inches long.
Slowly loosen the bond between the plastic grille and the hood. Be careful not to scratch the paint.
STEP # 2: Installation
Apply the Automotive Goop or equivalent Epoxy to the back of the vertical supports and the perimeter of the plastic grille.
Insure that the Euro Grille fits flush with the plastic grille and apply.
Allow the Automotive Goop or equivalent Epoxy to dry.
Install the double sided tape supplied in the kit, to the bottom of the plastic grille.
Reinstall the finished grille
CARE OF THE Z06 ROUND HOLE STAINLESS STEEL NOSE GRILLE KIT PRODUCT
The product is designed to last the entire life of your car under normal conditions. The product will resist heat, cold, rain, wind, and impacts. Although this product is durable, it will not survive a major impact or A collision.
Your Z06 NOSE GRILLE KIT is high quality stainless steel and can be cleaned normal car wash soap. You may also a stainless steel polish and a buffer to increase the shine factor. (You must wait 24 hours before attempting to clean the grilles)
If you have any questions or concerns, please contact us or e-mail us. Please view our website for product updates, tips or new products www.c4dhr.com
Copyright by MERCADO INDUSTRIES © 2009